Пневматика Vesta. Главная 
Продукция
Фиттинги
Фитинги МV
Throttle Fitting
This fitting houses a cartridge with a calibrated orifice. The orifice diameter causes a flow throttling thereby allowing the desired flow (see our Chart 1). The throttle fittings are mostly used when the user knows the exact cylinder speed or flow and when no further settings of the cylinder are required. The major advantage is the impossibility of undesired tamperings of the flow setting and expecially the constancy of the setting even in case of vibrations.
Технические характеристики
- Recommended tubings: Rilsan PA11, Nylon 6, Polyurethane
- Acceptable tolerance on tubes:
+/- 0,05 mm up to 10 mm
+/- 0,1 mm from 11 up to 15 mm - Application field: pneumatic circuits fed with filtered, lubricated air
- Working pressure: max 15 bar
- Working temperature: -10 ... 70°C
| Код | ØTubo | D1 | D2 | D3 | D4 | L1 | L2 | L3 | CH |
| Фитинг MV 44 04 M5 | 4 | M5 | 9 | 10 | … | 4 | 11 | 18 | 3 |
| Фитинг MV 44 04 18 | 4 | 1/8 | 9 | 14,5 | … | 5 | 18 | 19 | 13 |
| Фитинг MV 44 06 M5 | 6 | M5 | 12 | 10 | … | 4 | 11 | 20,5 | 3 |
| Фитинг MV 44 06 18 | 6 | 1/8 | 12 | 14,5 | … | 5 | 18 | 21,5 | 13 |
| Фитинг MV 44 06 14 | 6 | 1/4 | 12 | 16 | … | 6,5 | 21,5 | 21,5 | 13 |
| Фитинг MV 44 08 18 | 8 | 1/8 | 14 | 14,5 | … | 5 | 18 | 22 | 13 |
| Фитинг MV 44 08 14 | 8 | 1/4 | 14 | 16 | … | 6,5 | 21,5 | 22 | 13 |
